USB 1.1 Over Cat5 Superbooster Extender Wall Plate Transmitter

Description

USB 1.1 Over Cat5 Superbooster Extender Wall Plate Transmitter
Wall plate transmitter extends USB 1.1 signals over Cat5 up to 150 feet over Cat5 when paired with a receiver
5.0
 | 
1 Review

Product # :
29344

Connector 1 :
(1) USB-B Female
Connector 2 :
(1) RJ-45 Female
Description Features Certifications Specs Uses Contents Support
Product Features
• Extends a USB 1.1 signal up to 150ft over category cables
• Allows for flexible positioning of USB peripherals
• Transmitter is built into a wall plate
• Pair with a wall plate or dongle receiver for complete solution
Product Description
One component of a complete solution that, when paired with a receiver (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it! Our USB superbooster wall plate is powerful yet simple, with no drivers to install or special software required. It’s also compatible with any computer that supports USB.

The overall plug-and-play solution consists of this wall plate transmitter, and your choice of a compatible receiver that is sold separately: the 1-port dongle (#29350 or #29353), the 2-port wall plate (#29345), the 2-port dongle (#29346) or the 4-port dongle (#29347). Customize the configuration to your specific needs! This versatility is ideal for applications where you need more than one receiving USB device, or when you need a receiving dongle instead of a receiving wall plate.

The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy in-wall installation. This delivers a clean, finished look important for homes, classrooms, offices and anywhere you don’t want visible cables lying around. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster wall plate is bus-powered, no external power source is required. Compliant with USB specification 1.1.

Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.

Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like…
USB 1.1 Over Cat5 Superbooster Extender Wall Plate Kit
$108.99
1-Port USB 1.1 Over Cat5 Superbooster Extender Dongle RJ45 Female to USB B Male Receiver
$49.99
25ft VGA + 3.5mm A/V Cable with Rounded Low Profile Connectors M/M – Plenum CMP-Rated
$109.99
75ft Select VGA + 3.5mm Stereo Audio A/V Cable M/M – In-Wall CMG-Rated
$101.99
15ft Cat6 Non-Booted UTP Unshielded Ethernet Network Patch Cable – Plenum CMP-Rated – Blue (TAA Compliant)
$22.99
XLR Male Inline Connector (TAA Compliant)
$6.99
1-Port USB 1.1 Over Cat5 Superbooster Extender Dongle Receiver
$52.99
Product Certifications
Product Specifications
Color : White
UPC : 757120293446
Warranty : 1 Year
Vendor : C2G
Weight : 0.330 LB
• Download a PDF with the technical specifications of this product on the Support tab
System Requirements
• One superbooster receiver: 1-port dongle (#29350 or #29353), 2-port dongle (#29346), 4-port dongle (#29347) or 2-port wall plate (#29345) each sold separately

USB Specifications

• USB specification – USB 1.1
• USB transfer rates supported – Full Speed – 12Mbps, Low Speed – 1.5Mbps

Category Cable Requirements

• Category cables supported – Cat5, Cat5E, Cat6
• Cable pinouts supported – T568B – Recommended, T568A

Physical Characteristics

• USB connector – USB B Female
• Data connector – RJ45 Female
• Wall plate insert dimensions – 2.61 x 1.31in
• Dimensions – 4.13 x 1.31 x 1.34in
Product Uses

Diagram above shows how one input such as the PC can connect to the wallplate transmitter which distributes the signal to the receiver that then can connect to an output such as the USB Hub.
Package Contents
• One USB superbooster wall plate transmitter
• One RJ45 toolless IDC connector
• Two #6×32 slotted/Phillips screws
• User Guide
Product Support
Downloads

• Download the manual
• Download the technical specifications