Description
VGA over Cat5 Extender Box Receiver (TAA Compliant)
Product # :
29363
Input :
(1) RJ-45 Female
Output :
(1) VGA Female
Description Features Certifications Specs Uses Contents
Product Features
Breaks the VGA length limitation by extending signal over category cables
Available in both a wall plate and box form factor
Pair with a compatible wall plate or box transmitter for complete solution
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
You May Also Like
VGA over Cat5 Extender Box Transmitter (TAA Compliant)
$171.99
HD15 VGA F/F Mini Gender Changer (Coupler)
$5.99
6in Serial ATA Dual Power Splitter Cable
$3.99
HD15 VGA M/M Mini Gender Changer (Coupler)
$5.99
HDMI® Male to VGA Female Adapter Converter Dongle
$27.99
6ft 18 AWG Outlet Saver Power Extension Cord (NEMA 5-15P to NEMA 5-15R) (TAA Compliant)
$6.99
50ft VGA Monitor/Projector Cable with Rounded Low Profile Connectors M/M – Plenum CMP-Rated
$163.99
Product Certifications
Product Specifications
Color : Blue
UPC : 757120293637
Warranty : 3 Years
Vendor : C2G
Weight : 1.110 LB
Download a PDF with the technical specifications of this product on the Support tab
Signal Specifications
Video Signal Support – VGA
Maximum Video Resolution – 1920×1080 or 1920×1200
Maximum Cable Distance – 300ft*
Recommended Category Cable – Cat5e or Cat6
*Longer cable distances are supported at lower resolutions.
Power Adapter Specifications
Input Voltage – 100-240V
Output Voltage/Amperage – 18V, 1.0A
Cable Length – 1.5m
Plug Diameter – 4.75mm
Center Pin Polarity – Positive
Physical Characteristics
Video Output Port – HD15 Female x 1
Data Input Port – RJ45 Female x 1
System Requirements
Source device with a standard VGA video output
One transmitter, box or wall plate
One standard UTP cable*
One receiver, box or wall plate
Display device with a standard VGA input
*Cat5e or CAT6 is recommended for this product. CAT6 cabling will support a higher picture quality than Cat5e. STP cabling is recommended for environments with high EMI or RFI.
Product Uses
Classrooms
Conference rooms
Corporate environments
Houses of worship
Healthcare
Digital signage
Package Contents
Receiver Unit
Mounting Bracket Pack with Screws
Rubber Feet Pack
Quick Start Guide
One transmitter, box or wall plate
One standard UTP cable*
One receiver, box or wall plate
Display device with a standard VGA input
*Cat5e or CAT6 is recommended for this product. CAT6 cabling will support a higher picture quality than Cat5e. STP cabling is recommended for environments with high EMI or RFI.
Reviews
There are no reviews yet.