Arlon DPF 5200-007 Printable Cast Silver Etched Glass Film

Description

Arlon DPF 5200 Printable Cast Silver Etched Glass Film
DPF 5200
DPF 5200 is a premium decorative film that simulates an etched glass finish for interior or exterior applications. Available in three standard finishes, DPF 5200 is an ideal film to transform glass or clear substrates into elegant designs. Further customize graphics by printing on any of the finishes with standard digital print systems. DPF 5200 is the perfect choice for projects where a high-quality film for decorative etched glass designs is required.

Recommended Applications
Wall Graphics (Interior, Exterior)
Glass & Clear Substrates
Partition Graphics
Unique Features
Premium Decorative Cast Film
Ideal Choice for Both Printed and Non-Printed Graphics
Synthetic Liner makes Wet and Dry Application Easy
Face Film Thickness
2-Mil (50 Micron)
Finish
Etched Glass
Silver Etched Glass
Sparkle Etched Glass
Adhesive
Permanent (Clear)
Release Liner
Lay-Flat Synthetic
Durability (Unprinted)
7 Years
Ink Compatibility
Eco-Solvent
Solvent
UV
Latex
Roll Widths
24” / 30” / 48” / 60”
Roll Length(s)
10 Yards
50 Yards
DPF 5200
Printable Etched Glass Cast Film
Available in 3 finishes, DPF 5200 Etched Glass is a premium decorative, 2-mil (50 micron) printable cast vinyl designed to simulate an etched glass or sandblasted look on a variety of surfaces. Etched glass vinyl is ideal for interior and exterior applications on windows, mirrors, partitions and displays. Use it whenever you need the added elegance of an etched glass look without costly etching or sandblasting. This versatile product has been designed to deliver outstanding performance and high-quality printability. A special adhesive system ensures superior adhesion under the most demanding conditions. DPF 5200 is rated for outdoor durability up to 7 years (unprinted).

Applications & Features
Lay-flat liner.
Finely balanced adhesion, tack and shrinkage properties.
Outstanding durability, superior cutting and weeding for improved productivity.
Ideal for interior and exterior applications on windows, mirrors, partitions and displays.
Compatible with Eco-Solvent, Solvent, Latex and UV print systems.
Performance & Physical Data
Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 4 to 20 Gloss Units
Thickness Micrometer, Federal Bench Type 2-mil (50 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction ? 4.5 lb/in ? 0.8 kg/cm
Elongation Instron Tensile Tester as above ? 150%
Shelf Life (In Box) Ideal storage temperature 70°F (21°C) and 50% relative humidity 2 years from factory shipment
Application Temperature Range On clean, dry substrate 60°F to 90°F 10°C to 30°C
Service Temperature Range Applied to etched aluminum panels 24 hours prior to testing. 100% relative humidity 100° (38°) for 500 hours -40°F to 200°F -40°C to 93°C
Dimensional Stability 158°F (70°C), 48 hours aging 1-mil to 2-mil 0.25 mm to 0.50 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) 3.6 lb/in 0.65 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760cm/min) 150 g/2 in 30 g/cm
NOTE: DPF 5200 has the following light transmission:
Etched Glass: 93%
Silver Etched Glass: 70%
Sparkle Etched Glass: 82%
Terms & Conditions
The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.