3M Scotchgard™ Paint Protection Film Pro Series 200 Gloss WITH CAP

Description

3M Scotchgard™ Paint Protection Film Pro Series 200 Gloss WITH CAP

Scotchgard™ Paint Protection Film Pro Series 200 is the newest paint protection film designed to protect vehicle paint from rock chips, scratches and the elements

Available in matte and gloss finishes

Smooth top surface with hydrophobic features for easy maintenance

 

Details

 

 

Scotchgard™ Paint Protection Film
Pro Series 200 Gloss
1 / 3
Product Bulletin
September 2023 (US)
Product Description
• Designed to protect automotive paint and other vulnerable surfaces
of the vehicle from stone chips, scratches, bug damage, road tar, stains,
automotive fluid stains and punishing outdoor weathering including
harsh ultraviolet (UV) radiation
• High gloss, excellent clarity, and smooth top surface with hydrophobic
features for easy maintenance
• Low orange peel
• Simple release liner removal
• Available with or without cap sheet and easily removable.
• Optimized adhesive for repositioning, minimizing lift lines and adhesive marks
• Ability to stretch for bulk installations
• Self-healing technology to remove minor scratches or marks with heat applied to the film surface
• 10-year consumer warranty*
Approved to be used with 3M™ Pattern and Solutions Center, an advanced cutting-edge technology tool
with thousands of quality tested paint protection film patterns to help install faster with less waste —
saving time and money.
Recommended Application
• Personal and commercial fleet vehicles
Applications shown above indicate typical areas of placement on personal vehicles. Actual film placement will vary
according to the needs of the customer.
*For details and warranty information please visit our website.
Scotchgard™ Paint Protection Film
Pro Series 200 Gloss
2 / 3
Product Bulletin
September 2023 (US)
Product Line
Product name Description
Scotchgard™ Paint Protection Film
Pro Series 200 Gloss Transparent film with glossy finish
Typical Physical Properties
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes.
Characteristic Value
Color Transparent
Thickness Film with adhesive: 7.9 mil (0.20 mm)
Liner: 3.0 mil (0.08 mm)
Cap sheet*: 1.0 mil (0.025 mm)
Adhesive Acrylic, pressure-activated
Adhesive appearance Clear
Adhesion on automotive
paint (180° peels) Initial State: 20 minutes at room temperature 3.8 lbs/in (6.6 N/cm)
Normal State: 24 hours at room temperature 4.5 lbs/in (7.9 N/cm)
Elongation at break 290%
Tensile strength at
maximum force 1,600 PSI (11 MPa)
Liner Polyester
Application method Wet only
Substrate types OEM painted surfaces
Application temperature 60° – 85°F (16° – 30°C)
3M Commercial Solutions products are not tested against automotive manufacturer specifications.
* Available with or without cap sheet.
Installation
IMPORTANT: 3M recommends, for optimal application of paint protection film on the vehicle, install at
temperatures between 70°F – 79°F (+21°C – 26°C).
Maintenance, Cleaning and Removal
The cleaner must be wet, non-abrasive, without solvents, and have a pH value between 6 and 8 (neither
strongly acidic nor strongly alkaline).
Recommended to use a steamer for removal. Correct angle of removal is 30 – 60 degrees from the surface of
the paint.
Cap Sheet* – Polyester
Clearcoat – Polyurethane
Film – Polyurethane
Adhesive – Acrylic PSA
Release Liner – Polyester
Scotchgard™ Paint Protection Film
Pro Series 200 Gloss
3 / 3
Product Bulletin
September 2023 (US)
Shelf Life, Storage and Shipping
The shelf life as defined below remains an indicative and maximum data, subject to many external and non-controllable
factors. It may never be interpreted as warranty. The shelf life is never more than 18 months from the date of manufacture
on the original box.
IMPORTANT: Recommended storage conditions are between 60°F to 85°F (16°C to 30°C), out of sunlight, original
container in clean and dry area.
Health and Safety
When handling any chemical products, read the manufacturer’s container labels and the Article Information Sheets (AIS)
for important health, safety, and environmental information.
Follow the link to obtain SDS sheets for 3M products on 3M.com/SDS.
IMPORTANT: When using any equipment, always follow the manufacturer’s instructions for safe operation.
Technical Information
The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are
based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and
representative nature of such information is not guaranteed. Such information is intended for people with knowledge and
technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or
third-party intellectual property rights is granted or implied with this information.
Product Selection and Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance
of a 3M product in a particular application. Customer is solely responsible for evaluating the product and determining
whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment,
reviewing all applicable regulations and standards, and reviewing the product label and use instructions. Failure to
properly evaluate, select, and use a 3M product in accordance with instructions or to meet all applicable safety
regulations may result in injury, sickness, death, and/or harm to property.
Warranty, Limited Remedy, and Disclaimer
Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which
case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the
time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a
3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M
product or refund of the purchase price.
Limitation of Liability
Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss
or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential
(including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted,
including, but not limited to, warranty, contract, negligence, or strict liability.
3M and Scotchgard are trademarks of 3M. All other trademarks are the property of their respective owners.
3M Commercial Solutions
3M Center
Building 220 12E-04
St. Paul, MN 55144-1000
Phone 1-800-328-1684
www.3m.com/ppf
© 3M 2023. All rights reserved.