Description
Gerber Frosted Crystal 3 mil film 210-324
15” Punched 30” Punched 210 Crystal 24” Unpunched 48” Unpunched 10 Yard 50 Yard 10 Yard 50 Yard Color Code 10 Yard 50 Yard 10 Yard 50 Yard
P35717A P35718A P35715A P35716A Frosted Crystal 210-324P84346A P84347A P84354A P84355A
Gerber 210 Dusted and Frosted Crystal Film manufactured by 3MDusted Crystal 3 mil film provides the appearance of etched glass. Frosted Crystal 3 mil film provides the appearance of sandblasted glass. These films are perfect for all window, glass, mirror, and clear plastic applications. Three-year exterior life.
DESCRIPTION
Gerber Series 210 Dusted Crystal and Frosted Crystal films resemble acid-etched glass and
sand-blasted glass, respectively. These graphic films are custom formulated for use in cut
graphic applications, are dimensionally stable, and have been designed to withstand severe
weather and handling conditions. They also have a synthetic, transparent liner which prevents
moisture absorption, lies flat, and resist static buildup. Series 210 Dusted Crystal and Frosted
Crystal have good cutting and weeding characteristics, eliminate glare due to low gloss, have
permanent adhesive, and have an expected 3-year exterior durability and an interior durability of
up to 15 years.
INTENDED APPLICATIONS
Series 210 Dusted Crystal and Frosted Crystal films are ideally suited for pre-spaced,
electronically-cut graphics and decorative translucent graphics on non-vehicular glass and
acrylic substrates. They can be applied to flat, non-flexible surfaces. They are not intended or
warranted for printing or vehicle applications. The user should determine the suitability of all
substrates prior to actual application.
Series 210 Dusted Crystal and Frosted Crystal films have a clear adhesive and are therefore
suitable for use as cut graphics in window/transparent substrate applications. They can also be
used on opaque substrates.
This film is not recommended for or warranted for use on corrugated or highly irregular surfaces
or for use in fabricating automotive OEM’s. It is also not intended or warranted for applications
where petrochemical contact may occur. If petrochemical exposure is anticipated, refer to the
section below on “Protecting Graphics”.
Page 2 of 4
PERFORMANCE LIFE
When applied vertically, Dusted Crystal and Frosted Crystal films have an expected exterior
performance life of up to 3 years, an expected interior performance of up to 15 years (no direct
UV light), and up to 7 years performance when mounted to the inside of an outside window.
Performance statements are based upon field experience and exposure tests conducted
throughout the United States. Substrate selection, exposure angle, environmental conditions,
and maintenance of markings will affect actual performance. Continuous exposure in regions
that experience maximum sunny days will result in decreased performance. This product is not
recommended for horizontal applications.
SHELF LIFE AND STORAGE
Unprocessed film has a shelf life of up to two years after receipt. Processed film has a shelf life
of one year; therefore, apply film within one year of receipt. Film should be kept in a clean area
free from excessive moisture and direct sunlight. Maintain temperature at less than 100°F
(38°C).
Leave rolls of film in the original shipping carton, or suspend rolls horizontally. Store cut sheets
flat. Ship finished graphics lying flat or in a roll. To roll the graphic, wrap it sheeting–side-out on
a 6-inch (15-cm) diameter core, minimum. These methods help prevent the film and premasking
from wrinkling or popping off the liner. Never stack printed graphics face to face.
MAINTENANCE
To clean printed graphics, use a mild, non-abrasive soap with a soft cloth or sponge. Avoid
using alcohol-based cleansers or soaps containing grit or abrasives.
PROTECTING GRAPHICS
Gerber Technology offers products that are designed to protect vinyl and printed graphics.
Gerber Guard manufactured by 3M is a durable, dimensionally stable, glossy vinyl
overlaminate. This film has a petrochemical-resistant construction and is intended to be used
when markings may be exposed to petrochemical spillage and/or severe handling conditions.
Gerber UVGuard is a custom-formulated, 1-mil, clear, extremely durable polyvinyl fluoride
(PVF) laminating film designed to further expand the resistance to weathering of printed
graphics for up to five years.
Gerber UVGuard™ 9 manufactured by 3M is a 2-mil, glossy, clear, mildew-resistant, polyvinyl
fluoride laminating film with a petrochemical-resistant adhesive system. It is designed to further
expand the resistance to weathering of printed graphics up to nine years. Gerber UVGuard 9
has the highest protection from UV fade.
Gerber StrikeGuard™ is an 8.0-mil, clear, glossy overlaminate film designed for a variety of
applications. This heavy-duty overlaminate film is ideal for the protection of graphics, up to two
years, and is especially beneficial where printed graphics experience severe handling and
forceful impact. Gerber StrikeGuard is not recommended in applications that require
petrochemical protection or where additional UV or vandal resistance is desired.
Abrasion Guard SPF (Sign Protection Formula) is a clear, top-coat GerberColor Finishing
Series (GCF) Foil designed for use with EDGE® Series thermal transfer printing systems, to
protect graphics from moderate contact and exposure to harmful effects of UV rays. It has an
expected performance life of up to five years (when printed by itself). When applied as a
protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the
base color by up to 30%.
Page 3 of 4
CUTTING
Series 210 Dusted Crystal and Frosted Crystal films can be cut on any Gerber 15-inch
sprocketed plotter, or any Gerber FasTrack™ or ODYSSEY™ plotter. A 30° SuperSharp blade
is recommended. Plotters can be set to full speed.
The minimum recommended cutting height for text is .375 inch. This recommendation is based
upon evaluations using upper case Helvetica Medium copy. Users should verify their own ideal
cut heights based upon their specific cutting equipment. The user should perform a test cut to
determine the ideal tool force setting.
Excess film should be weeded within 24 hours of cutting to minimize the effect of adhesive flow.
SUBSTRATE PREPARATION
Before applying your graphic, wash the surface of your substrate with warm water and
detergent. Do not use soaps or other cleaners with lotions or creams as they will leave a
residue. Thoroughly rinse the surface and allow it to completely dry.
Saturate a clean paper towel with a solvent-based cleaner and wipe the substrate surface. Be
certain to follow all manufacturer safety guidelines when using any solvent. Dry the surface with
a lint-free paper towel before the solvent evaporates.
If applying to glass, wipe the surface with a 2 to 1 mixture of water and isopropyl alcohol. Glass
temperatures can vary across the surface. These temperature variations can produce stresses
which may cause the glass to break. Use caution when applying to glass.
Some polycarbonate substrates may weaken when certain films are applied to them. Because
of this possibility, the user will need to determine if the desired target substrate is compatible
with the 210 Series Dusted Crystal and/or Frosted Crystal film’s adhesive.
Many paint systems (e.g. two-part urethane) and some plastic substrates will outgas if they are
not fully cured. Outgassing can cause permanent bubbling in most films; substrates should be
tested for outgassing prior to final application. Plastics should be dried at 150ºF (66ºC) for 24
hours prior to application to help avoid outgassing.
APPLICATION TECHNIQUES
Dry application methods should be used with Series 210 Dusted Crystal and Frosted Crystal
and panels should be overlapped. Gerber standard tack application tape is required to be used
as the transfer carrier.
PHYSICAL PROPERTIES
Thickness 3 to 5 mils with adhesive
Film Color Dusted Crystal or Frosted Crystal
Adhesive PSA
Adhesive Color Clear
Liner Clear polyester
Tensile Strength (minimum)
Dusted = 5 lb/in (0.9 kg/cm)
Frosted = 3.5 lb/in (0.6 kg/cm)
Page 4 of 4
Applied Shrinkage .015 in (0.4 mm)
Minimum Application Temp. 40F (4C)
CHEMICAL RESISTANCE
Resists mild acids, mild alkalis, and salts. Has excellent water resistance.
RELATED LITERATURE
Refer to Product Bulletins of relevant foils and materials for product-specific handling,
production, and finishing information.
CONTACT INFORMATION
For help with questions concerning Gerber products, please call your distributor or Gerber
Customer Service at 1-800-222-7446 or (860) 644-1551. Visit us on the Internet at
www.gerbertechnology.com/signage to learn more about our many other foils, materials and
equipment.
When sold by Gerber, use only the corresponding Gerber Product Bulletin to determine product details, including but not limited to appropriate uses, warranty and processing.
EDGE, GERBER EDGE, GERBER EDGE 2, Gerber Scientific Products, GerberCal, GerberGraphics, GRAPHIX ADVANTAGE, GSP, and Images on Vinyl are Registered
Trademarks of Gerber Technology.
Abrasion Guard, ColorSet, EDGE Positive, EDGE READY, Gerber AutoMag, GERBER EDGE FX, Gerber FastFacts, Gerber Guard, Gerber HoloGraphix, Gerber ImageCal,
Gerber ImageCast, Gerber InstaChange, Gerber OMEGA, Gerber PermaGrip, Gerber PlastiGraphix, Gerber QUANTUM, Gerber StrikeGuard, Gerber Tone, Gerber UVGuard,
GerberCal, GerberColor, GerberColor Spectratone, GerberGauge, GerberGlow, GerberMag, GerberMask, GerberVision, GS 15, GS15plus, GSP Plot, GSxplus, GSx,
ImagePerfect, IMAGE READY, LexEdge, Matched Technology System, MTS, OMEGA, Process Pro, SpectraShade, and SpectraTint are Trademarks of Gerber Technology.
PANTONE, and other Pantone, Inc., trademarks are the property of Pantone, Inc.
LEXAN is a Registered Trademark of General Electric Company.
3M is a trademark of 3M Company.
enVision is a trademark of 3M Company that is licensed to Gerber.
©2018 Gerber Technology. All Right Reserved
Category: cut only FastFact #: 7040 Supplied by: Aftermarkets Last Modified: 02/27/18
Reviews
There are no reviews yet.